Skip to product information
Copper End Feed Fitting Reducer 22x15, 28x15, 28x22, 35x28mm
£0.99
Taxes included.
Shipping calculated at checkout.
Free Shipping
On orders over £100* (On Select Products)
Secure Payment
100% secure checkout
Easy Returns
30-day return policy
Pickup available at F3 Castings Way, Leafbridge, Castings Way, Lincoln
Usually ready in 24 hours
Copper End Feed Fitting Reducer
Copper end feed (capillary) fitting reducers step down the tube size at a fitting: the smaller end is a tube-size spigot that pushes into a larger fitting socket, and the larger end takes the bigger tube. Soldered on site with flux and solder, for heating, hot and cold water pipework.
Key points
- Copper end feed (capillary) fitting: solder and flux needed
- Reduces the tube size at a fitting without an extra coupler
- Sizes 22mm x 15mm, 28mm x 15mm, 28mm x 22mm and 35mm x 28mm
- Stocked at our Lincoln warehouse
What's included
1 x copper end feed fitting reducer in the size selected.
Specification
| Type | End feed fitting reducer |
|---|---|
| Material | Copper |
| Joint | Capillary, soldered (solder and flux not included) |
| Sizes | 22x15, 28x15, 28x22, 35x28mm |
Options
Choose the size from the Size menu. 35mm x 28mm is stocked from two sources, shown as the standard and the EP Atomic version. To join two tube sizes in line, see our end feed reducing couplers.
Installation and compliance
Clean and deburr the tube, apply flux to the tube end and fitting, then solder with lead-free solder on any drinking water pipework. Install in line with the Water Supply (Water Fittings) Regulations 1999 and good plumbing practice.
Delivery and collection
Free UK delivery on orders over £50 (£4.99 under £50). Free collection from our Lincoln unit, usually ready within 24 hours.
PDF Downloads
Manufacturer documents for this product.
