Skip to product information
Floplast push-fit waste 90 degree bend, grey shown for reference (32mm)

Floplast Push-Fit Waste Bends & Elbows 32mm & 40mm

£1.99
Taxes included. Shipping calculated at checkout.
Free Shipping

Free Shipping

On orders over £100* (On Select Products)

Secure Payment

Secure Payment

100% secure checkout

Easy Returns

Easy Returns

30-day return policy

Fitting
Colour
Size

Floplast push-fit waste bends and elbows, 32mm and 40mm.

  • Street elbows, 92.5°, 135° and knuckle bends
  • 32mm and 40mm sizes
  • White, and black street elbows
  • In stock in Lincoln

Pickup available at F3 Castings Way, Leafbridge, Castings Way, Lincoln

Usually ready in 24 hours

View store information

Floplast Push-Fit Waste Bends & Elbows 32mm & 40mm

90° Street Elbow / White / 32mm

F3 Castings Way, Leafbridge, Castings Way, Lincoln

Pickup available, usually ready in 24 hours

The Glow Group
Unit F3 Castings Way, Leafbridge
Lincoln LN6 9WG
United Kingdom

+441522300744

Image shows the standard grey push-fit fitting for reference; the fittings listed here are supplied in the colour shown in the variant name.

Floplast Push-Fit Waste Bends and Elbows

Floplast push-fit waste bends and street elbows for 32mm and 40mm waste pipe, for basin, bath, shower, sink and appliance waste and boiler or heat pump condensate drains. No solvent cement needed.

  • Floplast push-fit waste system
  • 90° street elbows (white and black), 92.5° bends, 135° (45°) bends and 90° knuckle bends
  • 32mm (1¼") and 40mm (1½") sizes
  • Rubber seal joints, no cement needed

What's included

1 x fitting in the type, colour and size selected.

Sizes and prices

Fitting Colour Size Floplast code Price (inc VAT)
90° Street Elbow White 32mm WP26 £1.99
90° Street Elbow White 40mm WP27 £1.99
90° Street Elbow Black 32mm WP26 £1.99
90° Street Elbow Black 40mm WP27 £1.99
92.5° Bend White 32mm WP14 £1.99
92.5° Bend White 40mm WP15 £1.99
135° Bend White 32mm WP18 £1.99
135° Bend White 40mm WP16 £1.99
90° Knuckle Bend White 32mm WP10 £1.99
90° Knuckle Bend White 40mm WP11 £1.99

Installation and compliance

Push-fit joints need no solvent cement: cut the pipe square, remove burrs, chamfer, lubricate the seal and push fully home. Waste and condensate pipework should be installed to Building Regulations Approved Document H with adequate falls and support. Solvent weld and push-fit waste systems are not interchangeable at the joint.

Delivery and collection

Free UK delivery on orders over £50 (£4.99 under £50). Free collection from our Lincoln unit, usually ready within 24 hours.

PDF Downloads

Manufacturer documents for this product.

Pairs well with

You may also like