UK Cylinders FlowCyl Pre-Plumbed Heat Pump Cylinder

UK Cylinders FlowCyl heat pump cylinder (pre-plumbed pipework not shown)

UK Cylinders FlowCyl Heat Pump Pre-Plumbed Unvented Cylinder 150L–300L

£1,584.99

Taxes included.

Free Shipping

On orders over £100* (On Select Products)

Secure Payment

100% secure checkout

Easy Returns

30-day return policy

Capacity 150L 180L 200L 250L 300L

Primary pump With circulating pump Without circulating pump

Overview

Heat pump cylinder supplied pre-plumbed for a faster, neater install. 150L to 300L, with or without primary pump.

Factory-fitted 3-port diverter, gauge, fill and flush valve
G3 cold feed pipework, expansion vessel and T&P cover
28mm full bore high-gain coil, 12mm sensor pocket
Supplied to order, delivered direct to site

Download the FlowCyl heat pump cylinder datasheet (PDF)

Pickup available at F3 Castings Way, Leafbridge, Castings Way, Lincoln

Usually ready in 2-4 days

Availability: please read before ordering

Cylinders are delivered direct to site from the manufacturer, UK Cylinders. Popular standard sizes are usually available from stock, but some sizes and specifications are made to order, so the lead time depends on the cylinder you choose.

After you order, we check availability with UK Cylinders and contact you with an estimated delivery date. If your cylinder needs to be made to order, we will confirm the lead time with you first and only place the order once you are happy with it. If it does not suit, you can cancel for a full refund.

Once a made-to-order cylinder has been confirmed with you and placed with UK Cylinders, the order cannot be cancelled. We arrange the delivery for you.

FlowCyl Heat Pump Pre-Plumbed Unvented Cylinder

FlowCyl heat pump cylinder supplied pre-plumbed, so a heat pump installation goes in quicker and neater. It suits any make of heat pump.

Pre-plumbed as standard

3-port full bore 28mm DHW/CH diverter valve
4 bar pressure gauge
Fill and flush valve with servicing ports
G3 compliant cold feed pipework, including tundish, drain point, filling loop and 3 bar inlet control set
28mm full bore, high gain, high flow heat pump coil
T&P insulation cover and potable expansion vessel
Factory fitted immersion heater (can be used for an anti-legionella cycle)
12mm heat pump sensor pocket

Choose "With circulating pump" to have an 8m primary circulating pump fitted, or "Without circulating pump" if you are using the heat pump's own pump.

Size	With pump	Without pump	Height (mm)	Coil (m²)	Heat loss (kWh/24h)	ErP
150L	FCHPP2150	FCHPP2150X	1130	2.08	1.22	B
180L	FCHPP2180	FCHPP2180X	1314	2.08	1.47	C
200L	FCHPP3200	FCHPP3200X	1444	2.97	1.55	C
250L	FCHPP3250	FCHPP3250X	1752	2.97	1.85	C
300L	FCHPP3300	FCHPP3300X	1975	2.97	2.02	C

All sizes are 545mm diameter. Add 150mm to the front of the cylinder for pipework, pumps and controls.

Image shows the standard FlowCyl cylinder; pre-plumbed pipework is not shown.

Installation

Unvented hot water systems must be installed by a G3-qualified installer and registered with Building Control or a competent person scheme.

Delivery

Delivered direct to site from UK Cylinders on a pallet, kerbside, to mainland UK addresses. Lead times depend on stock and whether your cylinder needs to be made to order; we will confirm your estimated delivery date after ordering. Please check the cylinder for damage on delivery and note any damage on the delivery paperwork before signing.