UK Cylinders FlowCyl Indirect Unvented Cylinder

UK Cylinders FlowCyl Indirect Unvented Hot Water Cylinder 90L–300L

£559.99

Taxes included.

Free Shipping

On orders over £100* (On Select Products)

Secure Payment

100% secure checkout

Easy Returns

30-day return policy

Capacity 90L 120L 150L 180L 200L 250L 300L

Overview

Indirect unvented cylinder for boiler-fed systems, 90L to 300L.

High-gain coil for fast reheat (14 to 41 mins)
Immersion heater backup, secondary return from 200L
1mm duplex stainless steel, 25-year cylinder warranty
Supplied to order, delivered direct to site

Download the FlowCyl indirect unvented datasheet (PDF)

Pickup available at F3 Castings Way, Leafbridge, Castings Way, Lincoln

Usually ready in 2-4 days

Availability: please read before ordering

Cylinders are delivered direct to site from the manufacturer, UK Cylinders. Popular standard sizes are usually available from stock, but some sizes and specifications are made to order, so the lead time depends on the cylinder you choose.

After you order, we check availability with UK Cylinders and contact you with an estimated delivery date. If your cylinder needs to be made to order, we will confirm the lead time with you first and only place the order once you are happy with it. If it does not suit, you can cancel for a full refund.

Once a made-to-order cylinder has been confirmed with you and placed with UK Cylinders, the order cannot be cancelled. We arrange the delivery for you.

FlowCyl Indirect Unvented Hot Water Cylinder

FlowCyl indirect unvented cylinder for boiler-fed systems. A high-gain coil heated by the boiler gives fast recovery and mains-pressure hot water, with an immersion heater as backup.

1mm duplex stainless steel inner vessel
Operating pressure 3 bar, test pressure 8 bar
Aluzinc grey casing
25-year cylinder warranty

Kit supplied

3 bar/6 bar inlet control set, 15mm x 22mm tundish, 9 bar/70°C T&P relief valve and T&P cover.

Connections: 3/4" compression hot draw, cold feed, secondary return, coil flow and coil return; 1 3/4" F immersion boss; 1/2" F T&P valve. Standard 545mm diameter.

Specifications

Size	Model	Height (mm)	Coil rating (kW)	Reheat (mins)	Heat loss (kWh/24h)	ErP
90L	FCIND0090	747	15.89	14	1.01	B
120L	FCIND0120	945	17.76	17	1.06	B
150L	FCIND0150	1130	18.25	21	1.22	B
180L	FCIND0180	1314	19.35	27	1.40	B
200L	FCIND0200	1444	19.94	31	1.44	B
250L	FCIND0250	1752	20.68	36	1.75	C
300L	FCIND0300	1975	23.57	41	2.04	C

Secondary return included on 200L and above.

Full dimensions and tapping heights are in the FlowCyl datasheet below.

Installation

Unvented hot water systems must be installed by a G3-qualified installer and registered with Building Control or a competent person scheme.

Delivery

Delivered direct to site from UK Cylinders on a pallet, kerbside, to mainland UK addresses. Lead times depend on stock and whether your cylinder needs to be made to order; we will confirm your estimated delivery date after ordering. Please check the cylinder for damage on delivery and note any damage on the delivery paperwork before signing.